I´ve got a imate jam, i need unlock it.. how to unlock? wich softwarE?
3th post from the top explain everything
cid unlock
Rudegar said:
3th post from the top explain everything
Click to expand...
Click to collapse
do you have a skype?
Related
Can you please tell me how can I do that?I google it about that but I don't know how to do that on my qtek 8300 I found only for 8310.
I have regedit, spv_services.But I don't know how to use them.
I really need your help, thanks in advance.
it is the same process since they (8310 and 8300) have the same hardware/software specifications.
ericjm said:
it is the same process since they (8310 and 8300) have the same hardware/software specifications.
Click to expand...
Click to collapse
It's not.When I enter in regedit it shows me diferent things compared with what it shows on qtek 8310.
So if know how to unlock the cid please tell me exactly what I have to do or give a link or something.
costyg said:
It's not.When I enter in regedit it shows me diferent things compared with what it shows on qtek 8310.
So if know how to unlock the cid please tell me exactly what I have to do or give a link or something.
Click to expand...
Click to collapse
believe me they are. try to search the forum to find out. im currently using a tornado (Dopod 577w).
Look here: http://www.spv-developers.com/forum/showthread.php?t=479
Hello people.
Yesterday i tried to upgrade my i-mate JAMin to WM6 but i couldn't do it.
anyway, because i couldn't upgrade it to WM6, after i upgrade to 2.40 WWE when i arrived at home i've tryed to upgrade to 2.13_Portuguese_ROM...
Here was when the problem started.
When updrade started, at 1% the problem ocurred... message ERROR.
From what i've read I need a flash ROM, I'm desperate...
Can any one help to find the flash ROM and how to recover my PPC?
Best Regards
Thank's in advance.
(Faria, ajuda-me! sei que podes fazê-lo nem que seja orientando-me em português...)
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Again, would people please read through the forum carefully before starting a new thread and ask the same questions over and over again. It is not that I am mean (just getting old), because any new thread will take time to read. Why not the person who need answer to read first and save other people's time. I found this forum contains so much information that most problems people generally ask are well covered one way or the other.
you may right, but human is talking here, we are not machines, human did mistakes and sometimes even if read it new people hard to get it, they need it step by step
if you don't want to help please don't reply, leave it a lone and it will go to the end with no replies
I've seen a lot of replies like yours witch they are not nice I think they have to be deleted
sorry for beeing rude, but we are human
paradis_pal said:
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Click to expand...
Click to collapse
Hello paradis, and everyone else.
Thank you for you quick reply and support.
Starting to answering your questions:
- My i-mate is G3
- ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
About the ROM 2.40..., i'm confused and since i can't read my i-mate i don't know the correct version but it was downloaded here in this forum.
Regards
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
What is you SPL Version?
NetrunnerAT said:
What is you SPL Version?
Click to expand...
Click to collapse
this not SPL problem
the arror at 1% is becasue of changing the langauge he just need NO VINDOR ID
that is all
and I want him to unlock CID, please do my steps
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
paradis_pal said:
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
Click to expand...
Click to collapse
Thank's paradis_pal
My i-mate came back to live, tank you so much.
I fallowed your instructions and the problem was solved.
Best Regards.
As i said, my i-mate is biack to life.
I try to unlock CID, but the link ftp://xda:[email protected]/Uploads/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar is not working.
Can any one put it on working?
NetrunnerAT said:
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
Click to expand...
Click to collapse
dear net if he has 3.08 the 2.20 will not be installed, I know what I'm writting
but thanks for the advice
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
paradis_pal said:
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
Click to expand...
Click to collapse
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
msylva said:
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
Click to expand...
Click to collapse
As I said before, the feedback for this rom is just... GREAT.
Better than this only if it was in Portuguese (for me, off Corse), because in these rom theres no Portuguese GPRS configurations.
Regards.
Hi to all,
I have Imate K-jam,
ie, wizard200 PDA,
Specs:
ROM-1.1.9.3
RADIO-01.01.10
FLASH CHIP TYPE- M-SYATEMS G3
I had a Jasjam before and i have used HardSPL to temporarirly unlock CID before upgrading to wm6.
Is there anything same like there for my wizard with the above specs?
Pls give me some idea friends
skr_xd said:
Hi to all,
I have Imate K-jam,
ie, wizard200 PDA,
Specs:
ROM-1.1.9.3
RADIO-01.01.10
FLASH CHIP TYPE- M-SYATEMS G3
I had a Jasjam before and i have used HardSPL to temporarirly unlock CID before upgrading to wm6.
Is there anything same like there for my wizard with the above specs?
Pls give me some idea friends
Click to expand...
Click to collapse
have some reading
http://forum.xda-developers.com/showthread.php?t=285435
http://forum.xda-developers.com/showthread.php?t=298613
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
ndn715 said:
have some reading
http://forum.xda-developers.com/showthread.php?t=285435
http://forum.xda-developers.com/showthread.php?t=298613
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Click to expand...
Click to collapse
Thanks a lot friend
Hi,
i have succsessfully unlocked my mda but i have forgett to extrakt and save the orginal hardspl whitch was spl-1.56.0000 with nbhextract.exe
the mda works... but mabye a newly spl version is better for my mda i guess...
so mabye one of you can help me to find the original spl or a better one that works on my mda....
i have read and searched the The Ultimate Radio Thread but i can't find out whitch one is the right one for me... as an excuse my english is not the best...
sorry & thx
download update to 6.1 from your countries T-Mobiles website.
For example: Dutch
It restores all settings to original
help me
spuniac said:
Hi,
i have succsessfully unlocked my mda but i have forgett to extrakt and save the orginal hardspl whitch was spl-1.56.0000 with nbhextract.exe
the mda works... but mabye a newly spl version is better for my mda i guess...
so mabye one of you can help me to find the original spl or a better one that works on my mda....
i have read and searched the The Ultimate Radio Thread but i can't find out whitch one is the right one for me... as an excuse my english is not the best...
sorry & thx
Click to expand...
Click to collapse
hi there can you help me what software did you use to unlock
Dust2Dust said:
download update to 6.1 from your countries T-Mobiles website.
For example: Dutch
It restores all settings to original
Click to expand...
Click to collapse
Not if you flashed Hardspl. The rom will go back to the original rom, but the hardspl will not go back to the stock spl. For that you must find your stock spl and use jumpspl to re-lock your phone to the stock spl and rom.
sameer2515 said:
hi there can you help me what software did you use to unlock
Click to expand...
Click to collapse
Just follow the easy steps here to unlock your phone.
http://forum.xda-developers.com/showthread.php?t=433835
Hello,
Im trying to unlock my HTC kaiser(Wm 6.1) using the KAISERv2Unlock. At the end of prozess I get the file 355757015478544.ued and the print out on the console "Please upload the file now to get your unlock code" but where?
Thanks
That's some commercial program right?
Are you trying to CID/HardSPL it or SIM unlock it? It is all free, just check our top sticked thread with howto.
Hi,
Oups yes is a commercial product sorry. I want to unlock my phone but i have wm 6.1 why can i downgrade to 6.0.
You must downgrade to 6.1 because the patched radio you'll flash isn't 6.1 compatible.
Yes , im looking for for a how to downgrade to 6.0
its done i folow the step hier http://forum.xda-developers.com/showthread.php?t=433835
thanks
gdeba001 said:
Yes , im looking for for a how to downgrade to 6.0
Click to expand...
Click to collapse
You only need to downgrade for jockyw2001's SIM unlocker. Olipro's SIM/CID unlocker/changer worked fine on 6.5 for me.
Dave
EDIT: Looks like you beat me to it
Unlocking is free for the Kaiser.
Please read the stickies, downgrading is possible, just use Hard SPL or use Olipro's unlocker for 6.1 ROMs.
Ta
Dave