i always tried to flash my rom using the new upgrade tool - when using old header and old tool, upgrade works perfectly.
You just have to edit the change.bat for your own demands. At the state you download it, it is configured to change header into T-Mobile WWE version.
click here
Code:
run change.bat first, then MaUpgradeUt.exe
André
I have the dutch T-mobile MDA Compact.
Will this patch work on it?
And with the upgrade do i get Swedish dialpad/keyboard?
Want to keep everything english if possible.
should work; guess you dont even have to edit the change.bat before excecuting.
you'll get a qtek dialer (which is only slightly different from the windows original since it uses a (nice looking) skin - the dialer itself is the same as the original)
if you dont want to have this stuff install you can skip installation via reset and install the things you wish manually.
André
Well the skin is no problem, i choose my own skins after instal.
But what worries me is that T9 is swedish after this upgrade?
Swedish words are useless for me, i want them english.
quappo said:
i always tried to flash my rom using the new upgrade tool - when using old header and old tool, upgrade works perfectly.
You just have to edit the change.bat for your own demands. At the state you download it, it is configured to change header into T-Mobile WWE version.
click here
Code:
run change.bat first, then MaUpgradeUt.exe
André
Click to expand...
Click to collapse
Did you tried it by yourself? Your change.bat is not complete, you forgot to convert nbf to nba. That's why change.bat do nothing.
Then, as I already wrote several days ago - I did the same what you are suggesting - old tool with new files. It crashed my device totally, I cannot do anything to repair. So, be careful
Thanks!!!!
I have edited change.bat with imate operator (CDL_404) and flashed successfully!!!! Work perfectly!
Thank you again!
@landau:
of course i tried it by myself. you may have noticed that the nba-files are already in the archive so they dont need to be decoded from any nbf files (actually that was the problem: xda3nbftool cant decrypt these new format nbf-files).
so just run change.bat and flash it!
@justifier:
t9 offers several languages, english, french, german, ... unfortunately no dutch. if you want dutch, just take the t9.cab out of your own ext rom and install it manually. after the upgrade you wont find any swedish things on your mda luckily.
quappo said:
@landau:
of course i tried it by myself. you may have noticed that the nba-files are already in the archive so they dont need to be decoded from any nbf files (actually that was the problem: xda3nbftool cant decrypt these new format nbf-files).
so just run change.bat and flash it!
Click to expand...
Click to collapse
Sorry, I downloaded rar archive from ftp://xda-developers.com/Magician/qtek_106_upgrade/ but there4 only nbf files, not nba...
some ****ing idots have changed the archive! who the hell is doing that bloody ****??? :twisted:
i'll upload it again.
there should only be ms_.nba and nk.nba in the archive (besides the update prog)
quappo said:
some ****ing idots have changed the archive! who the hell is doing that bloody ****??? :twisted:
i'll upload it again.
there should only be ms_.nba and nk.nba in the archive (besides the update prog)
Click to expand...
Click to collapse
no wonder I've got Country ID error....,
can you tell us after you have upload the actual rar files.. ??
Thanks in advance
Thanks quappo, it worked perfectly.
By the way, the UK version of the T-mob MDA Compact has id T-MOB005, not T-MOB101, so you have to alter that in change.bat to get it to work. For others here who're as clueless as me: to find your operator ID, all you have to do is:
1) copy getdevicedata.exe to your Magician and run it
2) look at \windows\devicedata.txt, it starts with something like: PM10A 0 A WWE E T-MOB005. Whatever you have instead of the T-MOB005 is your operator code, stick that in change.bat instead.
3) run change.bat
4) run the update!
archive is up now.
if new problems occur, please post here. we would have to secure the archive via password then :-(
arfster said:
Thanks quappo, it worked perfectly.
By the way, the UK version of the T-mob MDA Compact has id T-MOB005, not T-MOB101, so you have to alter that in change.bat to get it to work. For others here who're as clueless as me: to find your operator ID, all you have to do is:
1) copy getdevicedata.exe to your Magician and run it
2) look at \windows\devicedata.txt, it starts with something like: PM10A 0 A WWE E T-MOB005. Whatever you have instead of the T-MOB005 is your operator code, stick that in change.bat instead.
3) run change.bat
4) run the update!
Click to expand...
Click to collapse
good to hear that it worked for you
thanks for your instructions!
arfster said:
Thanks quappo, it worked perfectly.
By the way, the UK version of the T-mob MDA Compact has id T-MOB005, not T-MOB101, so you have to alter that in change.bat to get it to work. For others here who're as clueless as me: to find your operator ID, all you have to do is:
1) copy getdevicedata.exe to your Magician and run it
2) look at \windows\devicedata.txt, it starts with something like: PM10A 0 A WWE E T-MOB005. Whatever you have instead of the T-MOB005 is your operator code, stick that in change.bat instead.
3) run change.bat
4) run the update!
Click to expand...
Click to collapse
If i copy getdevicedata.exe i cant run it?
In the devicedata.txt i only see pm10a , nothing more.
Am i doing wrong something?
edit*** Ok should fitrst copy it to desktop and open with wordpad, can see the codes now ***
When i run change.bat i get 2 warnings about the nbf headers, Warning possibly wrong password bla bla .
Is this normal, or is something wrong?
Goes about ms.nba ms.nbf and nk.nba nk.nbf
quappo said:
arfster said:
Thanks quappo, it worked perfectly.
By the way, the UK version of the T-mob MDA Compact has id T-MOB005, not T-MOB101, so you have to alter that in change.bat to get it to work. For others here who're as clueless as me: to find your operator ID, all you have to do is:
1) copy getdevicedata.exe to your Magician and run it
2) look at \windows\devicedata.txt, it starts with something like: PM10A 0 A WWE E T-MOB005. Whatever you have instead of the T-MOB005 is your operator code, stick that in change.bat instead.
3) run change.bat
4) run the update!
Click to expand...
Click to collapse
good to hear that it worked for you
thanks for your instructions!
Click to expand...
Click to collapse
thanks for the instruction..., and thanks for quappo for the nba files...
you really did it man...., I have upgraded from O2 1.03 to 1.06 without any error..., many thanks...
still wonder how genius you are....
@justifire
warning is ok, proceed with flashing
[quote="JustifireWhen i run change.bat i get 2 warnings about the nbf headers, Warning possibly wrong password bla bla .
Is this normal, or is something wrong?
Goes about ms.nba ms.nbf and nk.nba nk.nbf[/quote]
Yes, that seems to be normal, I got it and it worked fine.
i've got an imate jam with wwe rom,but the txt file from getdevicedata shows only pm10a and wwe, no operator id. Does anybody knows what i have to write for operator id code?
pntzamaras said:
i've got an imate jam with wwe rom,but the txt file from getdevicedata shows only pm10a and wwe, no operator id. Does anybody knows what i have to write for operator id code?
Click to expand...
Click to collapse
See my above post.
U copy getdevicedata.exe to magician, doesn't mather wich map.
Click on this file with stylus.
Now browse to /windows/devicedata.txt ON YOUR DESKTOP PC and copy it to your DESKTOP.
Now you can open it with word or notepad and you will see that the code is much longer than what you see on your magician.
You gotta browse to the right in notepad to see the rest.
Good luck.
firstly, Thanks a lot to Buzz for the WM5 rom.
Had read your read_this_first.txt
the line : xda2nbftool -sd ph10 -s0 <operator> -sl WWE NK.nba
what "value" for the <operator> ?
does like "telkomsel" for Indonesia operator?
'cause i got country id error everytime try to flash.
Thanks
Telkomsel setting
just sharing my very limited knowledge
there is an easier way to configure operator setting
put the appropriate file at ppc, then tap .. and the installation begin..
i think we can choose one operator only..
so if we change our gsm card, we have to do above procedure again..
or please somebody cook this file so we can get autoconfig ...
Re: 1.60 c country id error, help please mention <operato
luckysebastian said:
what "value" for the <operator> ?
does like "telkomsel" for Indonesia operator?
'cause i got country id error everytime try to flash.
Click to expand...
Click to collapse
You can bypass the error & don't need to change operator id if you use this file: HimaUpgradeUt_NoId.exe. Use that file instead of HimaUpgradeUt.exe.
-rhmartin-
Hi,
I hope someone can be kind enough to assist me.
I'm trying to upgrade my SPV M1000 (orange) from WM2003 to WM2005.
I've downloaded the software but when I tried to install it the following error message comes up:
"ERROR 120 : COUNTRY ID ERROR
The ROM image you are trying to use is not designed to work with your pocket pc. Please check the vender web site and downlaod the correct ROM update"
Does anyone know what to do and where to download the correct rom?
Kind Regards
The nbf file is configured for operator ID O2 and language ID WWE.
If you need to change these, carry out all the steps below.
FROM a command prompt, change to the appropriate directory and do the following
1. Extract the decrypted versions of the nbf files
by entering the following commands at the command prompt:
xda2nbftool -x NK.nbf NK.nba 0x20040304
(if you do not have Radio.nbf in the directory ignore this command)
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306
2. Modify the operator ID in the nbfs to the value you require
by entering the following commands at the command prompt
substituting <operator> with the required value:
xda2nbftool -sd PH10 -so <operator> -sl WWE NK.nba
EXAMPLE TRY
xda2nbftool -sd PH10 -so Orange -sl WWE NK.nba
(if you do not have Radio.nbf in the directory ignore this command)
xda2nbftool -sd PH10 -so <operator> -sl WWE Radio_.nba
3. Update the crc values for each of the decrypted files
by entering the following commands at the command prompt:
xda2nbftool -c -u NK.nba
(if you do not have Radio.nbf in the directory ignore this command)
xda2nbftool -c -u Radio_.nba
4. Encrypt the files back into the nbf files by entering
the following commands at the command prompt:
xda2nbftool -x NK.nba NK.nbf 0x20040304
(if you do not have Radio.nbf in the directory ignore this command)
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306
then upgrade as you have been doing.
cheers
steve jubb
Hi,
Thanks for the quick response. I was hoping for something I could just click that would solve my problem. lol
I'm a newbie so I don't know much about all this technical stuff.
Whats a command prompt?
Where do I find the nbf. and how do I extract and decrpt them?
Where do I find the crc values that I need to change and how?
Sorry about all the questions but I'm kind of cluless.
Kind Regards
U can use NoID ROM Update Utility upgradeut.exe to avoid country ID errors ...
http://buzzdev.net/component/option,com_remository/Itemid,109/func,fileinfo/id,41/
:wink:
mwilmar said:
U can use NoID ROM Update Utility upgradeut.exe to avoid country ID errors ...
http://buzzdev.net/component/option,com_remository/Itemid,109/func,fileinfo/id,41/
:wink:
Click to expand...
Click to collapse
Hi,
when I tired to use that ROM update the followin error message came up:
"ERROR 103: ROM IMAGE FILE NOT FOUND
The pocket pc software update cannot locate the ROM image file to update your pocket pc. Download the correct ROM update for your pocket PC and try again"
Any clues on what to do now?
Kind Regards
dreamer181 said:
mwilmar said:
U can use NoID ROM Update Utility upgradeut.exe to avoid country ID errors ...
http://buzzdev.net/component/option,com_remository/Itemid,109/func,fileinfo/id,41/
:wink:
Click to expand...
Click to collapse
Hi,
when I tired to use that ROM update the followin error message came up:
"ERROR 103: ROM IMAGE FILE NOT FOUND
The pocket pc software update cannot locate the ROM image file to update your pocket pc. Download the correct ROM update for your pocket PC and try again"
Any clues on what to do now?
Kind Regards
Click to expand...
Click to collapse
did u place NK.nbf in the same folder..?? :roll:
u olso can change Country ID with ER2003Edit in a easy way...!!
look at this link...
http://buzzdev.net/component/option,com_remository/Itemid,109/func,fileinfo/id,74/
just install and double click on NK.nbf... :wink: change what u need...!!
Hi,
I downloaded the software onto my desktop and then double clicked it. My SPV M1000 was connected to the pc via the cradle.
The error message came up when I clicked the programme.
Do I need to put the programme on my PDA where the NK.nbf file is?
mwilmar said:
dreamer181 said:
mwilmar said:
U can use NoID ROM Update Utility upgradeut.exe to avoid country ID errors ...
http://buzzdev.net/component/option,com_remository/Itemid,109/func,fileinfo/id,41/
:wink:
Click to expand...
Click to collapse
Hi,
when I tired to use that ROM update the followin error message came up:
"ERROR 103: ROM IMAGE FILE NOT FOUND
The pocket pc software update cannot locate the ROM image file to update your pocket pc. Download the correct ROM update for your pocket PC and try again"
Any clues on what to do now?
Kind Regards
Click to expand...
Click to collapse
did u place NK.nbf in the same folder..?? :roll:
u olso can change Country ID with ER2003Edit in a easy way...!!
look at this link...
http://buzzdev.net/component/option,com_remository/Itemid,109/func,fileinfo/id,74/
just install and double click on NK.nbf... :wink: change what u need...!!
Click to expand...
Click to collapse
Hi,
I've downloaded ER2003Edit.. double clicked it and opened the NK.nbf file.
What do I have to do now? How do I change the country ID and operator?
Kind Regards
dreamer181 said:
mwilmar said:
dreamer181 said:
mwilmar said:
U can use NoID ROM Update Utility upgradeut.exe to avoid country ID errors ...
http://buzzdev.net/component/option,com_remository/Itemid,109/func,fileinfo/id,41/
:wink:
Click to expand...
Click to collapse
Hi,
when I tired to use that ROM update the followin error message came up:
"ERROR 103: ROM IMAGE FILE NOT FOUND
The pocket pc software update cannot locate the ROM image file to update your pocket pc. Download the correct ROM update for your pocket PC and try again"
Any clues on what to do now?
Kind Regards
Click to expand...
Click to collapse
did u place NK.nbf in the same folder..?? :roll:
u olso can change Country ID with ER2003Edit in a easy way...!!
look at this link...
http://buzzdev.net/component/option,com_remository/Itemid,109/func,fileinfo/id,74/
just install and double click on NK.nbf... :wink: change what u need...!!
Click to expand...
Click to collapse
Hi,
I've downloaded ER2003Edit.. double clicked it and opened the NK.nbf file.
What do I have to do now? How do I change the country ID and operator?
Kind Regards
Click to expand...
Click to collapse
yup... change the country ID and operator and save it... :!:
When I use the rom editor and open the ROM image the follwoing info comes up:
Device type: PH10
operator: 02
Language: WWE
version: 1.60c
checksum: 0x3330636130643938
ROm type: OS ROM (NK.nbf)
What do I need to change from the above and where do I need to save it? Do I save it on my pc or pda?
After I've done that do I just run the upgrade programme that will install WM2005?
By the way the NK.nbf file I need to change is it on my pda or is it the one I downloaded with the WM2005 software?
Place HimaUpgradeUt_noID.exe in the original folder as the upgrade software.
Then simply double click HimaUpgradeUt_noID.exe and it should work without having to edit rom files.
cheers
steve j
sjubb said:
Place HimaUpgradeUt_noID.exe in the original folder as the upgrade software.
Then simply double click HimaUpgradeUt_noID.exe and it should work without having to edit rom files.
cheers
steve j
Click to expand...
Click to collapse
Thanks steve, it worked a treat!!!
How do I install the files in "PostInstallFixes_WM5_1.60cWWE_Himalaya"?
It says I need to install PostInstallFixes.cab. There is no cab file in the folder.
Is there anything else I need to istall to tweak the PDA or to fix any bugs?
Highlight PostInstallFixes_WM5_1.60cWWE_Himalaya.cab in explorer on your pc and right click and select copy
From within Activesync click explore (once set up with your pda), go into My Documents and select paste from the menu and PostInstallFixes_WM5_1.60cWWE_Himalaya.cab will be copied from your pc to the pda.
Then go into file explorer on the pda, locate the above file and click it with the stylus which will install it.
cheers
Steve Jubb
How long does it take for the radio stack to upgrade?
It's been nearly 2 hours and it's still upgrading. Is this normal?
dreamer181 said:
How long does it take for the radio stack to upgrade?
It's been nearly 2 hours and it's still upgrading. Is this normal?
Click to expand...
Click to collapse
normaly it took about 30 minutes...
How cooked ROM? For o2 mini help advice knowledge.
someone know and everyone keep
NK
Beginning to decrypt the files first ROM-based. xda2nbftool.exe using command
xda2nbftool-x os.nbf NK.nba 0x20040304.
NK.nba be out.
You can not take files.
imgfs_raw_data.bin &imgfs_removed_data.bin
Who can come out to help, please advise.
have no tool design for Magician
~> I think must study address imgfs and XIP